Early Warning Water Leak Detection Equipment and Devices

Water Alert® - Vandal Resistant

NEW! "VR" SERIES
Vandal Resistant with "Wash Down" Mode.

  • 2 Models with optional accessories to meet your specific requirements.
  • Specifically designed for use in public and employee restrooms. (or any other areas such as laboratories and clean rooms that require frequent cleaning).
  • Vandal and corrosion resistant design.
  • "WashDown" mode enables the area to be cleaned, without activating the Water Alert.
  • All units tested 3 times during manufacture, and come with a 5 Year Limited Warranty. Made in the USA.
  • Simple installation using instructions furnished with all equipment, normally done by maintenance personnel.
  • In wall or surface conduit wire entry.

Principle of Operation and Construction

The VR Series is activated by water or any conductive fluid bridging the sensors (A & A). Upon activation the external L.E.D. indicator (B) will light RED. Once the liquid is removed, the VR Water Alert will self re-set. The VR Series is also equipped with a "Wash Down Mode". This feature allows the area to be cleaned with water without activating the Water Alert. The Wash Down Mode can be adjusted from 15 minutes to 2 hours. During this time the sensing circuit in the VR Water Alert is disabled. Once the Wash Down Mode times-out, the VR Water Alert will automatically resume sensing liquid. To activate the Wash Down Mode, the cleaning personnel simply pushes the external piezo switch (C). This switch has no moving parts and is touch sensitive. The external L.E.D. (B) will light Green, indication the VR Water Alert is now in Wash Down Mode.

Dimensions

4.5"W x 2.25"H x 2.5"D.

Have a Question for us?

Respond in seconds...not hours!

VR Water Alert installed in a rest room